TWIN STICK^® is our double adhesive foam tape made especially for P-O-P displays and signage. It has our extremely aggressive rubber-based adhesive for bonding various surfaces including corrugated, chipboard and wood as well as difficult to bond surfaces such as low surface energy plastics, powder coated materials and many UV coatings. Available in various thicknesses, the flexible foam carrier fills gaps which allows irregular surfaces to be joined.

Applications:
Permanent and temporary displays or signs at point-of-purchase. The product should be tested in the application before use.

Tips:
1. Use 1/32" thick TWIN STICK^® with our rubber-based adhesive for most applications. For uneven or textured surfaces, use 1/16" thickness.
2. For filling gaps, use 1/8" or greater thicknesses.

Product:
Cross-linked, closed-cell polyolefin foam in white or black with thicknesses of 1/32", 1/16", 1/8", 3/16", 1/4", 3/8"

Adhesive:
Rubber-based both sides (not recommended in applications with direct UV exposure).
Acrylic-based both sides (resistant to UV and plasticizers; requires 24 to 48 hours to reach a full bond)

Release Liner:
Silicone coated paper (blue printed top paper)

Application Temperature:
65° F to 100° F.

Service Temperature:
Rubber-based adhesive -20°F to 150°F.
Acrylic-based adhesive -20°F to 175°F.

Rule of Thumb:
1 lb. per 1 in.² of tape (Conditions and variables in applications can produce different stresses and affect holding power.)

Shelf Life:
1-2 years @72°F and 50% R.H. when stored in a closed container.

Stock Lists:
Over 85 die cut sizes in stock, put-up on rolls from 1/32" to 3/8" thick. Minimum: (1) roll. Click Twin Stick Stock List to view or to download a PDF of the Twin Stick Info Sheet click here. To view PDFs, you will need Adobe Acrobat Reader^®. Click Adobe Acrobat Reader^® to download free software.

Custom Converting:
Custom sizes can be produced and shipped to meet your requirements. Please call us at 800.852.1025 for additional information.

Packing Options:
Die-cut pieces are put up on rolls for applying or in pads for packing. Click on Packing Demo to view put-up options.